Winch Equipment

Anchor Winch Button sw-200 Pull

Winch button is a panel-type control element that provides the pulling function for the SW-200 model.

BADA Winch Circuit Breaker 250 AMP

BADA Winch Fuse, with a capacity of 250 Amps, provides reliable protection for your winch systems.

Quick dik ırgat şanzımanı

Anchor Windlass And Bow Thruster Remote Control System

Remote control system compatible with every brand of windlass and bow thruster.

Solenoid

The 24V-560A K-200 model solenoid provides powerful electrical control with its high current capacity.

Solenoid

12V 200A solenoid, model K-20012V-200A, is a suitable equipment component for high-current switching.

Solenoid

A solenoid relay, model K-400, with a 24V DC and 800A current capacity.

Solenoid

A solenoid model K-400 with a 12V operating voltage and 400A current capacity.

Quick Vertical Windlass Gearbox

The Quick vertical windlass gearbox with 2000W power, model code FVSSMR20TG70A00, is used as a spare part for your windl…

Quick Vertical Windlass Gearbox

Quick vertical windlass gearbox is a spare part for 1700W windlasses. Part code: FVSSMR17TG70A00.

Deck Winch Lower Connection Part

Lower attachment piece compatible with 900 W for deck top winch.

Italwinch Solenoid 700W - 110A 24V 4 Pin

Italwinch 700W, 110A, 24V, 4-pin solenoid.

Italwinch Solenoid 700W - 90A 12V 4 Pin

Italwinch brand 700W power, 90A current and 12V voltage 4-pin solenoid.

MAXWELL Maxwell -4547- QUICK RELEASE, clip

MAXWELL Maxwell -4547- QUICK RELEASE shackle, is an accessory and spare part connection shackle in the windlass equipmen…

MAXWELL MAXWELL PRESSURE ARM UPPER 8mm-5/16" CHAINWHEELS

MAXWELL Maxwell 5347 pressure arm top part, offered as an accessory and spare part for 8 mm / 5/16" chainwheel models.

MAXWELL Maxwell Kaveleta 3173/114C for 1000-1500 series

MAXWELL 3173/114C gypsy is a winch equipment designed for Maxwell 1000–1500 series winches, compatible with 3/8" BBB, 9…

MAXWELL Maxwell 2311 Spare clutch retaining clip

MAXWELL 2311 spare clutch retaining clip is a half-type spare part manufactured for MAXWELL 3500 VW, VWC, and VWCLP winc…

MAXWELL Maxwell SP2161 Magnet 6X4

MAXWELL Maxwell SP2161 Magnet 6x4 is a magnetic component offered as an accessory and spare part for windlass equipment.

Unbranded Maxwell 3856 Label (3500 series)

Unbranded Maxwell 3856 Label, accessory and spare part label for 3500 series windlass equipment.

Brandless Maxwell 3231/054C shackle 10mm

Replacement 10 mm gypsy for unbranded Maxwell 2200-2500 series windlasses, it is Maxwell 3231/054C referenced windlass c…

Brandless Maxwell 3207 Key 9.53X9.53X50

Brandless Maxwell 3207 Key 9.53X9.53X50 accessory and spare part is a brandless product in the windlass equipment catego…

MAXWELL MAXWELL 3500 10MM CLEVIS PIN

Compatible 10 mm fairlead for MAXWELL 3500, it is a windlass equipment in the windlass control panels category.

MAXWELL Maxwell Motor 24V 2300W

The Maxwell SP2908 model is a 24V 2300W windlass motor.

MAXWELL MAXWELL -6915- STRIPPER RC10/HRC10

MAXWELL MAXWELL -6915- STRIPPER RC10/HRC10 is a windlass accessory and spare part for boat and yacht mooring/anchor syst…